Air cooler temperature control
风冷器温度控制
There are two cooling methods, one is the main engine of the hydraulic system of the series forming machine, which is mainly installed on the return pipe, and after cooling, it is connected with the high-temperature hydraulic oil circulation system, and the outlet of the cooler;
冷却方法有两个,一个是在系列成型机的液压系统的主机,主要安装在回水管上,冷却后与高温液压油循环系统中,和冷却器的出口连接槽;
The hydraulic system is independent of the main machine and has a separate cooling circulation pipeline.
液压系统独立于成型机主机，并有单独的冷却循环管路。
The hydraulic station is installed next to the main engine, and the gear pump is used as a circulating pump.
主机旁边安装液压站，齿轮泵作为循环泵。
The cooler fan makes the surrounding air flow, taking away the oil heat in the cooler radiator, so as to achieve the purpose of cooling the oil.
冷却器风机使周围的空气流动，带走冷却器散热器内的油热，从而达到冷却油的目的。
This method, oil cooling technology has its advantages and disadvantages, the advantages are simple structural design, less space, convenient maintenance, low cost, so now 80% of the hydraulic control system through the cooling way, the disadvantage is that the enterprise site construction work and environmental impact studies are relatively serious, and the indoor temperature change caused by the cooling effect is not good, especially in the summer,
这种方法，油冷却技术有其优点和缺点，优点是结构设计简单，占用空间少，维修方便，成本低，所以现在是80%的液压控制系统通过冷却的方式，缺点是企业现场施工工作和环境影响研究相对严重，而且室内温度变化产生的降温效果不佳，特别是在夏季，
The field teaching environment analysis temperature is high, the temperature difference between the oil pipeline and the surrounding air cooler is small, the heat exchange learning effect is not good, the cooling efficiency is greatly reduced, but also affects the students' work safety environmental factors, dust is large, can make the cooler fin hang a layer of dust, hinder the oil and the environment, heat, therefore, the cooling effect needs to have a significant decline.
现场教学环境分析温度较高，石油管道和周围空气冷却器温差小,热量交换学习效果不好,冷却效率大大降低,同时也影响学生的工作安全环境因素,灰尘大,能使冷却器翅片挂一层灰尘,阻碍了石油和环境,热因此，冷却效果需要有一个显著的下降。
