Water cooler temperature control
水冷却器温度控制
The water cooler is used for the cooling of the hydraulic system and is still used in some domestic enterprises.
水冷器用于液压系统的冷却，目前仍在国内一些企业中使用。
It requires installation design of a water cooling cycle management system, equipped with a water cooler (oil-water heat exchanger), pipeline pump, development of a large water tank and through the corresponding connections.
它要求安装设计一个水冷循环管理系统，配备一个水冷器(油-水热交换器)，管道泵，开发一个大型水箱并通过相应的连接。
Under normal working conditions, the effect of the cooler is better, but there are many disadvantages, such as high one-time investment cost, large maintenance workload of descaling, winter drainage, and pipeline rust prevention, which increases the maintenance workload unnecessarily.
在正常工作条件下，冷却器的效果比较好，但也有很多缺点，如一次性投资成本高，除垢、冬季排水、管道防锈的维护工作量大，无端增加了维护工作量。
At the same time, in order to save water, cooling water can only choose the circulation cooling water tank, in order to better complete the cooling effect of cooling, when the summer room temperature is high, the water and air pollution in the water tank in the environment is not different temperature difference, high temperature will make the effect of water cooler greatly weakened, and water change will cause waste of water resources, which is not very economic in our country.
与此同时,为了节约用水,冷却水只能选择循环冷却水箱,为了更好的完成冷却的冷却效果,当夏天室温高,水箱中的水和空气污染在环境中不同温差不大,高温会使水冷器的效果大大减弱，而且换水会造成水资源的浪费，在我国是不太经济的，
At present, there are few researches based on this cooling treatment method in China.
目前国内很少有基于这种冷却处理方法的研究。
Many small and medium-sized enterprises have actively responded to the national call to save water and reduce water waste, and students have been banned from using this cooling work method.
许多中小企业积极响应国家节水、减少水浪费的号召，学生已被禁止使用这种冷却工作方法。
